| Customization: | Available |
|---|---|
| After-sales Service: | 7X24 |
| Warranty: | 720 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Motorcycle tyre tread cooling cutting production line:
Application: This machine is mainly used for cooling and collecting tyre tread or sidewall of bias tyre and radial tire after extruding.
Structure Features: This machine is mainly composed of take-up, contraction, constinuous weighting, marking, calendaring and sticking base system, cooling, speed set point setting, cutting, accelerated separation, water blow-off, inspection, spreading and spraying rubber cement, pick-up device etc., and designed according to the domestic and foreign advanced technologies, with speed regulation by AC frequency conversion, PLC control, entire line synchronization, no stretching for products.
| Model | TMX |
| Line speed | 5 ~ 25m/min |
| Take-up height | 900mm |
| Width of production roller | 650mm (design according to tread width) |
| Pick-up temperature | ≤ 40ºC (Ambient temperature + 5ºC) |
| Cutter: Max. thickness of tread cutting | 20mm |
| Max. cutting width | 450mm |
| Range od cutting angle adjustment | 35° ± 5° |
| Length tolerance of the cutting component | ± 3 |
| Cutting frequency | 10 ~ 15 cuts/min |
| Pressure of compressed air | 0.6 ~ 0.8 Mpa |
| Total motor power | 23.3KW |
| Cooling water consumption | 50 ~ 60 m3/h |
| Dimension (L*W*H) | 28000*2000*2800mm |
| Weight | 20000kg |
){kind=link}