EPDM Colorful Raw Chemical Road Sport Production Green Blue\

• Usage: Agricultural, Industrial, Medical, Vehicle, Electronic, Household, Sport
• Material: EPDM
• 3: 4
• 5: 6
• 7: 8
• 9: 0
• Model NO.: 1.0MM-3.0MM 2.5MM
• Transport Package: S
• Trademark: 1
• Origin: 2
• HS Code: 4002609000
• Production Capacity: 66666666 Tons Per Year

Product Description

1)  EPDM
EPDM
1.
the performance index of heat conveyer belt satisfies HG2297-92,the permission application temperature enhances 150ºC when spins the canvas take the polyester-cotton blend as the skeleton material,EPDM/CM for covers the rubber main body material,uses the DCP curing system.

,,EPDM/CM,DCP,

HG2297-92,150ºC.
2.
The influence of zinc oxide on the aging resistance of EPDM compound without carbon black under UV irradiation was investigated experimentally.


EPDM.
3.
The high speed rheological behavior of EPDM Nordel IP (3745P and 3722P)produced by CGC and INSITE technology was systematically studied through a double capillary rheometer working under constant speed.
INSITEEPDM Nordel IP(3745P

3722P).
2)  EPDM

Applicable rubber sheet specification (TxW) (mm)	(4-12)x600 (900)
Power supply (V/HZ)	380/50
Compressed air pressure (Mpa)	0.4-0.8
Max. Speed of picking up conveying belt (m/min)	40
Moving speed of hanging rubber rod (m/min)	0.117-0.75
Max. height of hanging sheet (mm)	1400
(KWXPCS)  Cooling fan FTA&capacity	final mixing: 0.37x48 master batch: 0.37x60
()  Swing sheet frequency (adjustable) (m)	1.3
Swing sheet frequency (m/min)	13
()  Temperature of rubber sheet (for reference)	5  Ambient temperature+5°
Cooling reducer motor	XWD1.1-4-1/29
Lift reducer motor	XWD2.2-6-1/35
Hanging rod reducer motor	XWD5.5-85-1/595
Conveyor reducer motor	XWD3-5-1/23
Down swing sheet reducer motor	XWD1.1-5-1/87

1.
Using the 20kt/a EPDM plant introduced from Japan MPC company we have developed the new grade for modifying resin.

2t,

J-3060P.
2.
Grafted modification is one of the important methods of EPDM modification.
,***,,,,

,,,

.
3.
The compression coefficient at low temperature, compression set, the physical properties and thermal resistance of EPDM/BR blends and EPDM/SBR blends were discussed .

,,,

.

3)  EPDM

1.
The interaction between nano-SiO_2 and radiation-vulcanized EPDM rubber has been characterized by Kraus equation,IR and crosslinking density.

KrausI,R.
2.
Ethylene-propylene diene terpolymer(EPDM)has been vulcanized by means of()~(60)Co γ radiation,filled with nano-SiO_2.

,.
4)  EPDM


1.
Permeability and selectivity of CO_2, N_2, and CH_4 gases through a sulfonated ethylene-propene-diene terpolymer (EPDM) ionomer membrane containing Co()were further investigated.

CO2,N2CH4(EPDM)(Co()-S-EPDM).

CO2,20ºC0 05mPa,CO2CO2/N2αCO2/N214 68.PCO2223Barrer

65 70,αCO2/CH4PCO2CO2,,2

,αCO2/N2,αCO2/CH4.N2CH4,,PCO2.

ArrheniusCO2,,,CO2
2.
The effect of Zinc-neutralized sulfonated EPDM(Zn-SEPDM)and EPDM on the crystalline and amorphous regions of isotactic polypropylene (IPP)and the compatibility of IPP/EPDM and IPP/Zn-SEPDM blends were studied through SAXS.

SAXS,DMATEM(EPDM)(Zn-SEPDM)(IPP)

IPP/Zn-SEPDMIPP/EPDM.
5)  EPDMThe machine can satisfy the requirement during mixing process of rubber sheet cooling,slicing and laminating,etc. Form automatic production line with internal mixer or dispersion mixer and double-cone screw automatic feeding sheeting mill or open mill to reach the effect of continuous production operation. The rubber sheet cooling mode can as per customer requirement adopt spray or immersion.The machine can satisfy the requirement during mixing process of rubber sheet cooling,slicing and laminating,etc. Form automatic production line with internal mixer or dispersion mixer and double-cone screw automatic feeding sheeting mill or open mill to reach the effect of continuous production operation. The rubber sheet cooling mode can as per customer requirement adopt spray or immersion.The machine can satisfy the requirement during mixing process of rubber sheet cooling,slicing and laminating,etc. Form automatic production line with internal mixer or dispersion mixer and double-cone screw automatic feeding sheeting mill or open mill to reach the effect of continuous production operation. The rubber sheet cooling mode can as per customer requirement adopt spray or immersion.The machine can satisfy the requirement during mixing process of rubber sheet cooling,slicing and laminating,etc. Form automatic production line with internal mixer or dispersion mixer and double-cone screw automatic feeding sheeting mill or open mill to reach the effect of continuous production operation. The rubber sheet cooling mode can as per customer requirement adopt spray or immersion.The machine can satisfy the requirement during mixing process of rubber sheet cooling,slicing and laminating,etc. Form automatic production line with internal mixer or dispersion mixer and double-cone screw automatic feeding sheeting mill or open mill to reach the effect of continuous production operation. The rubber sheet cooling mode can as per customer requirement adopt spray or immersion.