Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo

Certification: CE, ISO, GOST
Condition: New
Customized: Customized
Automatic Grade: Automatic
Structure: Horizontal
Transport Package: Wooden Case
Customization:

Contact Supplier

Gold Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory, Group Corporation

Basic Info.

Specification
STANDARD CONTAINER
Trademark
FINEYEAR
Origin
China
HS Code
84778000
Production Capacity
1000 Sets Per Year

Product Description

vertical injection molding machine 
1.Vertical clamping and vertical injection design 
2.Good quality

 

NJECTION UNIT Screw Diameter mm φ30 φ36
Screw Speed R/MM 0-200 0-200
Theoretical Shot Volume cm3 85 122
Maximum Shot Weight(PS) g 69 98
CLAMPING UNIT Clamping Model   HYDRAULIC
Clamping Force tons 45
Mould Plate Size mm 580x430
Space Between Tie-Bars mm 400x250
Minimum Mold Height mm 140
Slide Stroke mm 200
Ejector Force ton 1.3
OTHERS Motor Power kw 5.5
Heating Power kw 4.5
Electronic Ruler   Electronic Ruler/stroke controller
Proportional Valve   Single Proportional Valve
Machine Weight ton 1.4
Machine Size M 1.7x1.3x2.2
MAIN PRESS

 (1) Strain plate :
Use Q235A steel board which have been derusted, zinc painted,Plasma auto cut, CO2 protect jointed, alloy jointed and shaken to clear the stress.
(2) Platen
Use 45# rolling steel with heating operation which is manufactured on double faces and 1.6 roughness. Both of the cooling ends is 300mm with on/off valve on the inlet. There's cold and hot exchange function on the outlet. Platen ends with R30 angle.
(3) Upper and lower bolster:
 Q235A type welded steel plate in monolithic structure ; anneal treatment after welding can remove welding stress force, then planning machining (CO2 gas shielded welding, Japanese alloy welding rods). The upper and lower platforms adopt double direction temperature water balance system. The heat balancing plate of upper and lower platform has monolithic structure to reduce the distortion of platforms due to temperature difference. The tolerance of lead pressing test is 0.15mm.
 (4) /Hydraulic Cylinder:
The material of cylinder is ZG35 and ram is made of strong cold alloy cast iron, double seal ring with one dust holding ring.
(5)Hydraulic automatic steel placing device:

There're 2 sets of auto devices on both ends of nether bolster. It should place the side steel in a line before the mould is closing by the program with the effective of 6 hydraulic cylinders.
(6)The hydraulic balance and hoist device:
The 4 devices are set up on both ends of the lower bolster, which are going through the whole equipment. It should make sure the hoist balance of nether platen and keep the thickness of product equal to pledge the quality by the cooperating with the equal oil in every cylinder.

(7)New heating separate material:
Pressure-assistant:400kg/com2, Conduct: 0.039w/m.h, Max.temperature: 220ºC-250ºC, Thickness: 16mm
  The material could keep the quality while the shape of the rubber board is changing because of the overload heating and longtime work.
(8) Closing mould leading device:
It is 8 sets on both ends of nether bolster, which makes the mistake of lengthways not more than 0.5mm.
Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo Pet Preform Making Machine,Pet Preform Plastic Injection Molding Machine,Pet Preform Injection Moulding Machine HDPE Plastic Cargo Pallet Extrusion Injection Mo

Send your message to this supplier

*From:
*To:
avatar Ms. Melinda
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now